Monday, November 14, 2016

Step Block

TinkerCAD reflection

  1. Describe the object you built:
I built… the word steps on a block!



2)  List the steps it took to design your 3d object:
1.I took a rectangle
2.Then took the letters s.t.e.p.s.
3.I put  the letters s.t.e.p.s. name on the block
4.Finally made the letters 3D and printed it



3)  How did you decide to build this object?
I built this object because…I thought of my step brothers and that we build stuff out of cardboard it is called the steps lab so I put steps on my block!




4)  If you had more time or materials (plastic), how would you improve your object?
I would add or change….I would change the color with more colors if it could happen. Also I would make it a little bigger!



5) Add a picture of your 3D printed object below:


Nameplate

TinkerCAD reflection

  1. Describe the object you built:
I built...
I am building my name Riley in the middle of a box.


2)  List the steps it took to design your 3d object:
  1. Got all the letters
  2. Put them in the box
  3. Made the letters even
  4. Made it  colorful



3)  How did you decide to build this object?
I built this object because…


I  just did the first thing that came to my mind. (MY NAME)

4)  If you had more time or materials (plastic), how would you improve your object?
I would add or change….

The  size and make  it jumbo

5) Add a picture of your 3d printed object below:


Minecraft Character

TinkerCAD reflection

  1. Describe the object you built:
I built… a Minecraft creeper



2)  List the steps it took to design your 3d object:
1. I made the feet which are cubes.
2.Then make the body on top of the feet.
3. Then make the cube head.
4. Then add the facials.



3)  How did you decide to build this object?
I built this object because… Because i have a love for minecraft and videos games




4)  If you had more time or materials (plastic), how would you improve your object?
I would add or change…. I would make it the actual colors



5) Add a picture of your 3D printed object below:

Horned Creature

TinkerCAD reflection

  1. Describe the object you built:
I Built a ball with horns



2)  List the steps it took to design your 3d object:
1.First i, made a ball
2.Then, i made two little balls for the feet
3.Last, i made two little horns
4.



3)  How did you decide to build this object?
I built this object because it was cute.




4)  If you had more time or materials (plastic), how would you improve your object?
I would add or change more color to it.




5) Add a picture of your 3D printed object below:Nov 7, 2016 9:07:47 AM.jpg

Nameplate

TinkerCAD reflection

  1. Describe the object you built:
I built… my football number and team with my name.



2)  List the steps it took to design your 3d object:
1.  Put the base in place
2. Found the letters and number
3. Put them so they were all visible
4. Then grouped and put it all in the same color



3)  How did you decide to build this object?
I built this object because…
I love sports and to play them. This will help remind me of the love I share for the game.



4)  If you had more time or materials (plastic), how would you improve your object?
I would add or change…. The color and make it one thing.




5) Add a picture of your 3DOct 24, 2016 8:48:03 AM.jpg printed object below:

Egg

TinkerCAD reflection

  1. Describe the object you built:
I built...
A yellow egg 60mm by 52mm by 53mm


2)  List the steps it took to design your 3d object:
1. Get the egg
2. Change the size and color
3.
4.



3)  How did you decide to build this object?
I built this object because…
I like eggs and It just seemed fun



4)  If you had more time or materials (plastic), how would you improve your object?
I would add or change….
I would add more detail and make it cooler also I would change the color.




5) Add a picture of your 3D printed object below:

Nameplate

TinkerCAD reflection

  1. Describe the object you built:
I built… a rectangle with my initials on it



2)  List the steps it took to design your 3d object:
1.created rectangle with squares
2.enlarge initials
3.put initials in in rectangle  
4.



3)  How did you decide to build this object?
I built this object because…to honor myself




4)  If you had more time or materials (plastic), how would you improve your object?
I would add or change…. My full name




5) Add a picture of your 3D printed object below:Nov 14, 2016 8:51:16 AM.jpg

RV

TinkerCAD reflection

  1. Describe the object you built:
I built… I built a RV that is all red with accessories inside the RV.  



2)  List the steps it took to design your 3d object:
  1. First, I realized there wasn’t a bed, so I added that
  2. Then,there were only two wheels so I had to make more
  3. Next, I realized there wasn’t a bottom or a roof so I filled in the gaps with shapes
  4. Lastly, I had to dye my vehicle red




3)  How did you decide to build this object?
I built this object because…

I thought it would be cool to make a vehicle.


4)  If you had more time or materials (plastic), how would you improve your object?
I would add or change….

I would make engines that would function.
5) Add a picture of your 3D printed object below:


Nameplate

TinkerCAd reflection

  1. Describe the object you built:
I built… a nameplate related to my soccer team



2)  List the steps it took to design your 3d object:
  1. First I build a rectangle big enough to fit my letters and numbers
  2. Then, I added my team name (the league I play for)
  3. Next, I put my soccer number.
  4. I added my last name.
  5. Finally, I checked to make sure all the characters were in place and even


3)  How did you decide to build this object?
I built this object because… I love soccer and wanted something related to it




4)  If you had more time or materials (plastic), how would you improve your object?
I would add or change…. The color to burgundy.



5) Add a picture of your 3D printed object below:

Nov 2, 2016 9:45:36 AM.jpg

Sunday, November 13, 2016

Unicorn

CARDBOARD UNICORN

For me and my partners prototype we made a pink fluffy unicorn that you have feed what I am thinking of using gummy bears.
On day 3 we accomplished getting supplies.
On the 4th day we taped the cracks in the box.
On day 6 we cut long cardboard tubes as legs and hot glued them on the unicorn’s body.
On the last day we added a mouth to the unicorn and placed tickets inside.You get tickets when you  feed the unicorn!
For the project we used hot glue and tape to attach the cardboard together.I also used scissors to cut cardboard and make small cracks to fit the tickets.The project also needed one big box and one small box.The small box was for the head and the big box was for the body.


The problem we had was that we didn’t have enough time to paint the unicorn pink. We only got to draw a little color to the unicorn. Mr.Almon (technology teacher) helped us with supplies and a planning sheet.