Bunny with ice cream

TinkerCAd reflection

1. Describe the object you built:

I built a bunny with an ice cream cone and no tail.

2)  List the steps it took to design your 3d object:

1. First I took an egg and put a bunny ear and folded bunny ear
2. Then I put a hand and an ice cream on the hand, looking as if the bunny was holding it.

3.then i thought about the eyes and I put a white ball on each side.

4. Then I put a black ball on each white ball to make it look like eyes. I also put a nose

3)  How did you decide to build this object?

I built this object because…

I built Bunny because i didn’t know what to make. I looked at the “characters” zone and I found an egg. I thought about easter and then I got it. I thought about making a bunny with… an ice cream cone!

4)  If you had more time or materials (plastic), how would you improve your object?

I would add or change….

I was very excited when I added the nose and ice cream that I forgot to put a tail on the bunny. If I wasn’t so excited of finishing and not re-checking it to see if it was good, I sure would’ve added the tail.

5) Add a picture of your 3D printed object below:

This is Bunny: ( he came out red):

key charm

TinkerCAd reflection

1. Describe the object you built:

I built...

I built A key charm that says DOC MAIN.

2)  List the steps it took to design your 3d object:

1. Well first I had to write doc main into the charm.

2. Then i made it the size i wanted it to be.

3. Then i also copied the words into the charm.

4. And finally I made the connector for the tie.

3)  How did you decide to build this object?

I built this object because… I built this because I wanted something to add to my gaming setup.

4)  If you had more time or materials (plastic), how would you improve your object?

I would add or change….  I would change Made the charm more detailed with design.

5) Add a picture of your 3D printed object below:

Buildings

TinkerCAd reflection

1. Describe the object you built:

I built...an inflatable building and some skyscrapers.

2)  List the steps it took to design your 3d object:

First I got an oval for my pavilion

2.Then, i got rectangles for my towers.

3. I built my base.

4.I am done now.

3)  How did you decide to build this object?

I built this object because…

I like downtown cities.

4)  If you had more time or materials (plastic), how would you improve your object?

I would add or change…. I would add more buildings.

5) Add a picture of your 3D printed object below:

Cenitpede

TinkerCAd reflection

1. Describe the object you built:

I built...

A centipede

2)  List the steps it took to design your 3d object:

1.make half spheres copy and paste then addd face

2. upload to flash drive

3. print

4.

3)  How did you decide to build this object?

I built this object because…

I don't know why

4)  If you had more time or materials (plastic), how would you improve your object?

I would add or change….more spheres

5) Add a picture of your 3D printed object below:

Nameplate

TinkerCAd reflection

1. Describe the object you built:

I built… a big ol subscribe :)

2)  List the steps it took to design your 3d object:

1. I fugured out what i wanted to make

2. Got all the shapes

3. Write what i wanted it to say

4. And one and done(printed it)

3)  How did you decide to build this object?

I built this object because… It will look cool when i do my videos

4)  If you had more time or materials (plastic), how would you improve your object?

I would add or change….

I would add another layer

5) Add a picture of your 3D printed object below:

Guitar

TinkerCAd reflection

1. Describe the object you built:

I built… a guitar

2)  List the steps it took to design your 3d object:

1.i made a rectangular base

2.i put round things around the base

3.i made a neck

4.i put on oval for strings and tuners

3)  How did you decide to build this object?

I built this object because…

I love guitar

4)  If you had more time or materials (plastic), how would you improve your object?

I would add or change…. I need More strings.

5) Add a picture of your 3D printed object below:

Cat and Soldier

TinkerCAd reflection

1. Describe the object you built:

I built...cat and soldiers

2)  List the steps it took to design your 3d object:

1.I copy cat

2.put person on the cat

3.make a gun

4.

3)  How did you decide to build this object?

I built this object because…I like to make someone on the cat.

4)  If you had more time or materials (plastic), how would you improve your object?

I would add or change….add gun or put hat

5) Add a picture of your 3D printed object below:

House

TinkerCAd reflection

1. Describe the object you built:

I built...

A house

2)  List the steps it took to design your 3d object:

1.put houses

2.connect them

3.make a car

4.print

3)  How did you decide to build this object?

I built this object because…

It was the first thing that came to mind

4)  If you had more time or materials (plastic), how would you improve your object?

I would add or change….

The stairwell

5) Add a picture of your 3D printed object below:

Star

TinkerCAd reflection

1. Describe the object you built:

I built...

A ninja throwing star.

2)  List the steps it took to design your 3d object:

1.I got a ring shape

2. Got 3 rhombus shapes

3.Colored all of them silver

4.Then put all of them together and printed it

3)  How did you decide to build this object?

I built this object because…

I felt like having a throwing star.

4)  If you had more time or materials (plastic), how would you improve your object?

I would add or change….

I would add spikes to all of the sides.

5) Add a picture of your 3D printed object below:

3D printed temple

TinkerCAd reflection

1. Describe the object you built:

I built… The temple of the monkey god and weird penguin thing

2)  List the steps it took to design your 3d object:

1. Get shapes
2. Morph them
3. Put them together
4. yay

3)  How did you decide to build this object?

I built this object because…

I like monkeys and penguins.

4)  If you had more time or materials (plastic), how would you improve your object?

I would add or change…. I would change the color.

5) Add a picture of your 3D printed object below: